About Sustainable Natural Real Wood Veneers
Sustainable natural wood veneers have all the beauty and warmth that can only come from using real wood. The uniqueness of each log means that every project has its own special appeal, yet at the same time you can have the confidence that the forests where the veneer came from are being sustainably regrown to give a continuing supply in perpetuity. Suitable for all low wear and dry vertical interior applications such as furniture and panelling.
Figured Sycamore
-
Cut:
Quarter-cut -
Sheet Sizes
2400mmx1200mm, 2700mmx1200mm, 3000mmx1200mm - Download Image
- Share
- Samples
Product Sizes & Data
Nominal veneer leaf size(s): Lengths generally 2500mm up to 3100mm. Widths - various
Typical Finished Panel size(s): 2400mmx1200mm, 2700mmx1200mm, 3000mmx1200mm
Thickness of Veneer: 0.55mm - 0.65mm
Product Data Sheet: DOWNLOAD
Typical Finished Panel size(s): 2400mmx1200mm, 2700mmx1200mm, 3000mmx1200mm
Thickness of Veneer: 0.55mm - 0.65mm
Product Data Sheet: DOWNLOAD
About & Applications
Availability: Good availability
Price zone: Above average
Applications: Suitable for interior, dry, low/medium-wear applications, vertical and low/medium-wear horizontal applications such as wall panelling, interior doors, furniture, ceiling panels, table- and desk-tops. It should not be used for high wear areas such as floors, stair treads, counter-tops exposed to heavy wear/water and kitchen counter-tops. Not suitable for use in high humidity, wet, steamy or damp conditions such as vanity tops, splash-backs or above stoves and dishwashers. Do not use in exterior applications, areas exposed to temperatures above 60 degrees C nor areas around stoves and fireplaces. Note that the appearance of veneer will change over time due to direct and indirect light, and exposure to heat and air. Some logs or leaves of veneer may age differently to other logs/leaves of the same species. Keep out of direct sunlight. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that the veneer, coating type, fabrication methods, associated materials and cleaning products/methods are suitable for the application.
href="https://briggs.com.au/wp-content/uploads/2026/03/ABOUT_APPLICATIONS_VENEER_2021.pdf" target="_blank">DOWNLOAD
Colour/Appearance: Figured
Consistency of Appearance: Average
Other names: Figured European Sycamore
Botanical Name: Acer pseudoplatanus
Origin: EU
Price zone: Above average
Applications: Suitable for interior, dry, low/medium-wear applications, vertical and low/medium-wear horizontal applications such as wall panelling, interior doors, furniture, ceiling panels, table- and desk-tops. It should not be used for high wear areas such as floors, stair treads, counter-tops exposed to heavy wear/water and kitchen counter-tops. Not suitable for use in high humidity, wet, steamy or damp conditions such as vanity tops, splash-backs or above stoves and dishwashers. Do not use in exterior applications, areas exposed to temperatures above 60 degrees C nor areas around stoves and fireplaces. Note that the appearance of veneer will change over time due to direct and indirect light, and exposure to heat and air. Some logs or leaves of veneer may age differently to other logs/leaves of the same species. Keep out of direct sunlight. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that the veneer, coating type, fabrication methods, associated materials and cleaning products/methods are suitable for the application.
href="https://briggs.com.au/wp-content/uploads/2026/03/ABOUT_APPLICATIONS_VENEER_2021.pdf" target="_blank">DOWNLOAD
Colour/Appearance: Figured
Consistency of Appearance: Average
Other names: Figured European Sycamore
Botanical Name: Acer pseudoplatanus
Origin: EU
Pressing, Finishing & Fabrication
Handling and Care instructions DOWNLOAD
Edging availability: Veneer edging can be made by/is available from edge-band manufacturers. Note that edging may not necessarily look the same as the face veneer. Solid wood is generally not available, the closest match is Rock Maple or Silver Ash.
Finish: Use a high quality low-yellowing 2-pack polyurethane designed for use with wood veneer for sealer and top coats, with manufacturer approved UV prohibitors. Sealer and coating film thickness to be as recommended by the coating manufacturer. Note that if wood stains are used, this may accentuate features such as pin-knots, figure, grain and join lines. Test pieces should be prepared to ensure that the coating and stains are suitable.
Pressing, Finishing & Fabrication information DOWNLOAD
Edging availability: Veneer edging can be made by/is available from edge-band manufacturers. Note that edging may not necessarily look the same as the face veneer. Solid wood is generally not available, the closest match is Rock Maple or Silver Ash.
Finish: Use a high quality low-yellowing 2-pack polyurethane designed for use with wood veneer for sealer and top coats, with manufacturer approved UV prohibitors. Sealer and coating film thickness to be as recommended by the coating manufacturer. Note that if wood stains are used, this may accentuate features such as pin-knots, figure, grain and join lines. Test pieces should be prepared to ensure that the coating and stains are suitable.
Pressing, Finishing & Fabrication information DOWNLOAD
Sustainability, Health & Safety
Environmental: Sustainably managed
Environment Health & Safety information DOWNLOAD
Available as environmentally certified: May be available as FSC® - please contact Briggs
Emissions from raw veneer: Zero Formaldehyde emissions (E0) and zero VOC's from raw veneer. To maintain E0 rating, specify E0 substrate and glue, and E0 water based low-VOC coating clear coat.
Formaldehyde statement DOWNLOAD
Material Safety Data Sheet DOWNLOAD
Environment Health & Safety information DOWNLOAD
Available as environmentally certified: May be available as FSC® - please contact Briggs
Emissions from raw veneer: Zero Formaldehyde emissions (E0) and zero VOC's from raw veneer. To maintain E0 rating, specify E0 substrate and glue, and E0 water based low-VOC coating clear coat.
Formaldehyde statement DOWNLOAD
Material Safety Data Sheet DOWNLOAD
Fire Ratings
Fire Hazard Group 1 not possible at this stage. Fire Hazard Group 2 when glued onto 12mm and thicker FLAMEBLOCK FRMDF (NCC 2022 / AS 5637 / ISO 9705 Room Burn Test). Download FIRE HAZARD GROUP 2 INFORMATION
Fire Hazard Group 3 when glued onto 6mm and thicker Standard MDF and Particleboard Download Fire Hazard Group 3 Assessment Report
Fire Hazard Group 3 when glued onto 6mm and thicker Standard MDF and Particleboard Download Fire Hazard Group 3 Assessment Report