Nature's Grain, with a Designer's Palette.
ReToned by Briggs Veneers elevates natural sliced timber with a refined palette of designer-curated dyes. Crafted in Italy using a special technology that dyes the veneer all the way through, every nuance of grain, depth, and warmth is preserved — delivering the authenticity of real wood in colours that simply don’t exist in the forest.
Ideal for furniture, wall panelling, and vertical interior applications where extraordinary colour meets the irreplaceable beauty of natural timber.
Retoned Lichen Tulipwood
-
Cut:
Crown-cut -
Sheet Sizes :
2400mmx1200mm, 2700mmx1200mm, 3000mmx1200mm, sometimes 3250mmx1200mm - Download Image
- Share
- Samples
Product Sizes & Data
Nominal veneer leaf size(s): Lengths generally 2500mm up to 3100mm and sometimes 3300mm. Widths - various,
2400mm x 1200mm, 2700mm x 1200mm, 3000mm x 1200mm, sometimes 3250mm x 1200mm
Thickness of Veneer: 0.5mm - 0.6mm
Product Data Sheet: DOWNLOAD
Thickness of Veneer: 0.5mm - 0.6mm
Product Data Sheet: DOWNLOAD
About & Applications
Availability: Good availability
Price zone: Above average
Applications: Suitable for interior, dry, low/medium-wear applications, situations of low or medium light, vertical and low/medium-wear horizontal applications such as wall panelling, interior doors, furniture, ceiling panels, table- and desk-tops: for where unique colours are required. It should not be used for high wear areas such as floors, stair treads, counter-tops exposed to heavy wear/water and kitchen counter-tops. Not suitable for use in high humidity, wet, steamy or damp conditions such as vanity tops, splash-backs or above stoves and dishwashers. Do not use in exterior applications, areas exposed to long periods of very bright direct or indirect light, or temperatures above 60 degrees C, or areas around stoves and fireplaces. Note that the appearance of veneer will change over time due to direct and indirect light, and exposure to heat and air, or use with unsuitable coatings. Some logs or leaves of veneer may age differently to other logs/leaves of the same type. Keep out direct sunlight. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that the veneer, coating type, fabrication methods, associated materials and cleaning products/methods are suitable for the application.
About & Applications information: DOWNLOAD
Colour/Appearance: Green
Consistency of Appearance: Better than average
Species: Tulipwood
Botanical Name: Liriodendron tulipifera
Origin: EU
Price zone: Above average
Applications: Suitable for interior, dry, low/medium-wear applications, situations of low or medium light, vertical and low/medium-wear horizontal applications such as wall panelling, interior doors, furniture, ceiling panels, table- and desk-tops: for where unique colours are required. It should not be used for high wear areas such as floors, stair treads, counter-tops exposed to heavy wear/water and kitchen counter-tops. Not suitable for use in high humidity, wet, steamy or damp conditions such as vanity tops, splash-backs or above stoves and dishwashers. Do not use in exterior applications, areas exposed to long periods of very bright direct or indirect light, or temperatures above 60 degrees C, or areas around stoves and fireplaces. Note that the appearance of veneer will change over time due to direct and indirect light, and exposure to heat and air, or use with unsuitable coatings. Some logs or leaves of veneer may age differently to other logs/leaves of the same type. Keep out direct sunlight. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that the veneer, coating type, fabrication methods, associated materials and cleaning products/methods are suitable for the application.
About & Applications information: DOWNLOAD
Colour/Appearance: Green
Consistency of Appearance: Better than average
Species: Tulipwood
Botanical Name: Liriodendron tulipifera
Origin: EU
Pressing, Finishing & Fabrication
Handling and Care instructions: DOWNLOAD
Edging availability: Veneer edging is generally available from Briggs Veneers. Matching solid wood is not available.
Finish: Use a high quality non-yellowing 2-pack acrylic urethane designed for use with wood veneer for sealer and top coats, with manufacturer approved UV prohibitors added in the maximum amount recommended by the coating manufacturer. Sealer and coating film thickness to be as recommended by the coating manufacturer. Test pieces should be prepared to ensure that the coating is suitable.
Pressing, Finishing & Fabrication information: DOWNLOAD
Edging availability: Veneer edging is generally available from Briggs Veneers. Matching solid wood is not available.
Finish: Use a high quality non-yellowing 2-pack acrylic urethane designed for use with wood veneer for sealer and top coats, with manufacturer approved UV prohibitors added in the maximum amount recommended by the coating manufacturer. Sealer and coating film thickness to be as recommended by the coating manufacturer. Test pieces should be prepared to ensure that the coating is suitable.
Pressing, Finishing & Fabrication information: DOWNLOAD
Sustainability, Health & Safety
Environmental: Environmentally certified to be from responsibly managed forests
Environment Health & Safety information: DOWNLOAD
Available as environmentally certified: May be available as FSC® certified - please contact Briggs to discuss.
Type of environmental certification: FSC® 100% and/or FSC® Controlled
FSC Chain of Custody certificate: DOWNLOAD
Emissions from raw veneer: Low Formaldehyde E1
Formaldehyde certificate: DOWNLOAD
Material Safety Data Sheet: DOWNLOAD
Environment Health & Safety information: DOWNLOAD
Available as environmentally certified: May be available as FSC® certified - please contact Briggs to discuss.
Type of environmental certification: FSC® 100% and/or FSC® Controlled
FSC Chain of Custody certificate: DOWNLOAD
Emissions from raw veneer: Low Formaldehyde E1
Formaldehyde certificate: DOWNLOAD
Material Safety Data Sheet: DOWNLOAD
Fire Ratings
Fire Hazard Group 1 not possible at this stage. Fire Hazard Group 2 when glued onto 12mm and thicker FLAMEBLOCK FRMDF (NCC 2022 / AS 5637 / ISO 9705 Room Burn Test). DOWNLOAD FIRE HAZARD GROUP 2 INFORMATION
Fire Hazard Group 3 when glued onto 6mm and thicker Standard MDF and Particleboard DOWNLOAD FIRE HAZARD GROUP 3 ASSESSMENT REPORT
Fire Hazard Group 3 when glued onto 6mm and thicker Standard MDF and Particleboard DOWNLOAD FIRE HAZARD GROUP 3 ASSESSMENT REPORT