About TRUEGRAIN®
TrueGrain and other dyed reconstituted veneers are made from real wood veneer, dyed all the way through, then laminated and re-sliced to make veneer in unique colours and patterns. It is the most consistent of all wood veneers (though it may occasionally have some very slight variation in colour and pattern between dye-batches). It is suitable where a high degree of uniformity is required, such as large areas of wall panelling.
TrueGrain Tasmanian Oak
-
Cut:
Quarter-cut -
Sheet Sizes :
2400mmx1200mm, 3000mmx1200mm - Download Image
- Share
- Samples
Product Sizes & Data
Nominal veneer leaf size(s): 2500mmx350mm, 3100mmx350mm
2400mmx1200mm, 3000mmx1200mm
Thickness of Veneer: 0.55mm - 0.65mm
Product Data Sheet: DOWNLOAD
Thickness of Veneer: 0.55mm - 0.65mm
Product Data Sheet: DOWNLOAD
About & Applications
Availability: Good availability
Price zone: Medium - Average
Applications: Suitable for interior, dry, low/medium-wear applications, vertical and low/medium-wear horizontal applications such as wall panelling, interior doors, furniture, ceiling panels, table- and desk-tops. It should not be used for high wear areas such as floors, stair treads, counter-tops exposed to heavy wear/water and kitchen counter-tops. Not suitable for use in high humidity, wet, steamy or damp conditions such as vanity tops, splash-backs or above stoves and dishwashers. Do not use in exterior applications, areas exposed to temperatures above 60 degrees C nor areas around stoves and fireplaces. Note that the appearance of veneer will change over time due to direct and indirect light, and exposure to heat and air, or use with unsuitable coatings. Keep out direct sunlight. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that the veneer, coating type, fabrication methods, associated materials and cleaning products/methods are suitable for the application.
About & Applications information: DOWNLOAD
Colour/Appearance: Mid Brown
Consistency of Appearance: Considerably better than average
Made from: Undyed American White Oak
Botanical Name: Eucalyptus regnans, Eucalyptus delegatensis (& some E.obliqua
Origin: Australia
Price zone: Medium - Average
Applications: Suitable for interior, dry, low/medium-wear applications, vertical and low/medium-wear horizontal applications such as wall panelling, interior doors, furniture, ceiling panels, table- and desk-tops. It should not be used for high wear areas such as floors, stair treads, counter-tops exposed to heavy wear/water and kitchen counter-tops. Not suitable for use in high humidity, wet, steamy or damp conditions such as vanity tops, splash-backs or above stoves and dishwashers. Do not use in exterior applications, areas exposed to temperatures above 60 degrees C nor areas around stoves and fireplaces. Note that the appearance of veneer will change over time due to direct and indirect light, and exposure to heat and air, or use with unsuitable coatings. Keep out direct sunlight. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that the veneer, coating type, fabrication methods, associated materials and cleaning products/methods are suitable for the application.
About & Applications information: DOWNLOAD
Colour/Appearance: Mid Brown
Consistency of Appearance: Considerably better than average
Made from: Undyed American White Oak
Botanical Name: Eucalyptus regnans, Eucalyptus delegatensis (& some E.obliqua
Origin: Australia
Pressing, Finishing & Fabrication
Handling and Care instructions DOWNLOAD
Edging availability: Veneer edging is generally available from Briggs Veneers. Matching solid wood is not available.
Finish: Use a high quality low-yellowing 2-pack polyurethane designed for use with wood veneer for sealer and top coats, with manufacturer approved UV prohibitors. Sealer and coating film thickness to be as recommended by the coating manufacturer. Test pieces should be prepared to ensure that the coating and stains are suitable.
Pressing, Finishing & Fabrication information DOWNLOAD
Edging availability: Veneer edging is generally available from Briggs Veneers. Matching solid wood is not available.
Finish: Use a high quality low-yellowing 2-pack polyurethane designed for use with wood veneer for sealer and top coats, with manufacturer approved UV prohibitors. Sealer and coating film thickness to be as recommended by the coating manufacturer. Test pieces should be prepared to ensure that the coating and stains are suitable.
Pressing, Finishing & Fabrication information DOWNLOAD
Fire Ratings
Fire Hazard Group 1 not possible at this stage. Fire Hazard Group 2 when glued onto 12mm and thicker FLAMEBLOCK FRMDF (NCC 2022 / AS 5637 / ISO 9705 Room Burn Test). Download FIRE HAZARD GROUP 2 INFORMATION
Fire Hazard Group 3 when glued onto 6mm and thicker Standard MDF and Particleboard Download Fire Hazard Group 3 Assessment Report
Fire Hazard Group 3 when glued onto 6mm and thicker Standard MDF and Particleboard Download Fire Hazard Group 3 Assessment Report