The tradition of innovation.
Oberflex by Briggs Veneers brings together the timeless beauty of real wood with the performance demands of contemporary interiors. Sourced from the finest logs and pre-finished with Oberflex’s proprietary high-resistance coating, each panel arrives ready to install – protecting the natural grain, texture, and warmth of the timber beneath without compromising its authentic character.
Designs spanning natural, stained, and textured veneers, the Oberflex collection offers extraordinary breadth – from classic species to designer tones – all finished to an exacting standard that makes it equally at home in high-end residential and demanding commercial environments.
- Real wood veneer panels with a factory-applied, high-resistance finish
- Superior resistance to impacts, scratches, and stains
- Natural grain, texture, and character fully preserved
- Range of varying finishes including matte, satin, brushed, and textured relief
- Pre-finished surface coating applied – requires pressing onto your choice of substrate prior to installation
- Suited to high impact residential and commercial applications
Oberflex Sables Sapelle
-
Cut:
Quarter-cut -
Sheet Sizes:
3000mmx1200mm - Download Image
- Share
- Samples
Product Sizes & Data
Laminate sheet size(s): 3050mmx1270mm
3000mmx1200mm
Thickness of laminate: 1mm
Product Data Sheet: DOWNLOAD
Thickness of laminate: 1mm
Product Data Sheet: DOWNLOAD
About & Applications
Availability: Good availability
Applications: Especially suited where wear and stain resistance is required, whilst maintaining the presence of high quality real natural wood veneer, such as shop-fitting applications, office work stations, dry horizontal applications such as ceiling panels, counter-tops, desk- and table-tops. It should not be used for floors, stair treads, kitchen counter-tops, high humidity/wet/steamy/damp conditions, exterior applications, areas exposed to temperatures above 60 degrees C or areas around stoves and fireplaces. Note that the appearance of veneer may change over time due to direct and indirect light, and exposure to heat. Some sheets of veneer laminate may age differently to others. Keep out of direct sunlight. Note that wire-brushed laminates may be hard to clean. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that this product, fabrication methods, associated materials and cleaning products/methods are suitable.
About & Applications information: DOWNLOAD
Colour/Appearance: Red
Consistency of Appearance: Better than average
Made from: Resin impregnated Sapele veneer finished with a hard melamine surface and bonded onto a laminate backer
Origin: EU
Applications: Especially suited where wear and stain resistance is required, whilst maintaining the presence of high quality real natural wood veneer, such as shop-fitting applications, office work stations, dry horizontal applications such as ceiling panels, counter-tops, desk- and table-tops. It should not be used for floors, stair treads, kitchen counter-tops, high humidity/wet/steamy/damp conditions, exterior applications, areas exposed to temperatures above 60 degrees C or areas around stoves and fireplaces. Note that the appearance of veneer may change over time due to direct and indirect light, and exposure to heat. Some sheets of veneer laminate may age differently to others. Keep out of direct sunlight. Note that wire-brushed laminates may be hard to clean. As it is not possible to cover all associated manufacturing materials, conditions, products and methods, the end-user is responsible for carrying out the necessary tests and trials to check that this product, fabrication methods, associated materials and cleaning products/methods are suitable.
About & Applications information: DOWNLOAD
Colour/Appearance: Red
Consistency of Appearance: Better than average
Made from: Resin impregnated Sapele veneer finished with a hard melamine surface and bonded onto a laminate backer
Origin: EU
Pressing, Finishing & Fabrication
Handling and Care instructions: DOWNLOAD
Edging availability: Pre-finished unglued veneer edge-strips are available from Briggs. The side of the edge-strips must be sealed with a lacquer pen or similar.
Finish: Prefinished - Matt. Ribbed surface
Pressing, Finishing & Fabrication information: DOWNLOAD
Edging availability: Pre-finished unglued veneer edge-strips are available from Briggs. The side of the edge-strips must be sealed with a lacquer pen or similar.
Finish: Prefinished - Matt. Ribbed surface
Pressing, Finishing & Fabrication information: DOWNLOAD
Sustainability, Health & Safety
Environmental: Sustainably managed
Environment Health & Safety information: DOWNLOAD
Available as environmentally certified: No
Emissions from laminate: Formaldehyde - E1, Less than 0.13 mg/m3
Formaldehyde certificate: DOWNLOAD
VOC emissions certificate: DOWNLOAD
Material Safety Data Sheet: DOWNLOAD
Environment Health & Safety information: DOWNLOAD
Available as environmentally certified: No
Emissions from laminate: Formaldehyde - E1, Less than 0.13 mg/m3
Formaldehyde certificate: DOWNLOAD
VOC emissions certificate: DOWNLOAD
Material Safety Data Sheet: DOWNLOAD
Fire Ratings
Oberflex prefinished veneer on laminate is not fire rated. Closest matching veneer that achieves Group 2 on FLAMEBLOCK is Sapele stained to the colour of Oberflex Sables Sapele